Unsigned Demux(Multiple Output channel Switch): Difference between revisions
Jump to navigation
Jump to search
Created page with "Image:TArduinoUnsignedDemux.png == Summary == Routes an unsigned input value to one of multiple outputs based on a control signal. == Description == The **Unsigned Demux (Multiple Output Channel Switch)** component takes a single unsigned input and directs it to one of several outputs. The active output is determined by the value of the **Select** pin, while the **Initial Channel** property sets the default output at startup. The number of output pins i..." |
(No difference)
|
Latest revision as of 04:59, 22 August 2025
File:TArduinoUnsignedDemux.png
Summary
Routes an unsigned input value to one of multiple outputs based on a control signal.
Description
The **Unsigned Demux (Multiple Output Channel Switch)** component takes a single unsigned input and directs it to one of several outputs. The active output is determined by the value of the **Select** pin, while the **Initial Channel** property sets the default output at startup. The number of output pins is defined by the **Output Pins** property.
Diagram:
Categories
- File:TArduinoSignalCategory.png Category Signal – Signal routing and switching.
- File:TArduinoIntegerCategory.png Category Integer – Integer and numeric manipulation.
Properties
- Initial Channel – Defines which output channel is active at startup.
- Output Pins – Number of unsigned output pins generated.
Pins
Input Pins
- In – Unsigned input value.
- Select – Control input that determines which output channel is active.
Output Pins
- Out – Unsigned outputs; the number of pins depends on the **Output Pins** property.