Split Unsigned TCP/IP IPv4 Address To Octets: Difference between revisions
Jump to navigation
Jump to search
Created page with "Image:TArduinoSplitUnsignedIPv4ToOctets.png == Summary == Splits a 32-bit unsigned integer IPv4 address into four individual octets. == Description == The **Split Unsigned TCP/IP IPv4 Address To Octets** component takes a single 32-bit unsigned integer representing an IPv4 address and breaks it down into its four constituent octets. This allows easier manipulation, display, or transmission of IPv4 addresses in segmented form. <b>Diagram:</b> Image..." |
(No difference)
|
Latest revision as of 23:25, 14 September 2025
File:TArduinoSplitUnsignedIPv4ToOctets.png
Summary
Splits a 32-bit unsigned integer IPv4 address into four individual octets.
Description
The **Split Unsigned TCP/IP IPv4 Address To Octets** component takes a single 32-bit unsigned integer representing an IPv4 address and breaks it down into its four constituent octets. This allows easier manipulation, display, or transmission of IPv4 addresses in segmented form.
Diagram:
Categories
- File:TArduinoNetworkCategory.png Category Network – Networking and IP address handling.
- File:TArduinoIntegerCategory.png Category Integer – Integer and numeric manipulation.
Properties
- Enabled – Enables or disables the component.
Pins
Input Pins
- In – 32-bit unsigned IPv4 address input.
Output Pins
- Octet0 – First octet of the IPv4 address.
- Octet1 – Second octet of the IPv4 address.
- Octet2 – Third octet of the IPv4 address.
- Octet3 – Fourth octet of the IPv4 address.