Compass HMC5883

From Visuino
Revision as of 07:05, 10 June 2022 by Visuino (talk | contribs) (Created page with "Image:TCompassHMC5883L.png == Summary == {{:Summaries:Summary Compass HMC5883}} == Description == Use this component to read data from HMC5883L Compass. <b>Resources:</b> [http://www.instructables.com/id/Arduino-Nano-HMC5883-Compass-With-Visuino/ Instructable: Arduino Nano: HMC5883 Compass With Visuino] <b>Diagram:</b> Image:TCompassHMC5883L.Preview.png == Categories == *Image:TArduinoAnalogToolbarCategory.png Category Measurement/Analog - {{:S...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Summary

Reads data from HMC5883L Compass

Description

Use this component to read data from HMC5883L Compass.



Resources:

Instructable: Arduino Nano: HMC5883 Compass With Visuino

Diagram:

Categories

Properties

  • AveragedSamples - Specifies the number of samples to be averaged by the Compass
  • Bias - Specifies the Bias of the Compass
  • Gain - Specifies the Gain for the Compass
  • Idle - Specifies if the Compass is in Idle mode
  • Enabled - Enables or disable the component.

Pins

  • X - The X Axis Analog Output pin of the component or element
  • Y - The Y Axis Analog Output pin of the component or element
  • Z - The Z Axis Analog Output pin of the component or element
  • Out - The I2C Output pin of the component or element
  • Clock - The clock input pin of the component or element
Retrieved from "https://visuino.com/wiki/index.php?title=Compass_HMC5883&oldid=2870"