Inverse Analog (Change Sign)

Description

In Visuino, the "Inverse Analog (Change Sign)" component is used to invert the analog value received from a sensor or another source. It essentially changes the sign of the value, turning positive values into negative ones and vice versa.

This component is useful in various scenarios where you need to reverse the direction or polarity of a signal. For example, if you have a sensor that outputs values in one direction (e.g., increasing as the temperature rises), but you need the opposite behavior (decreasing value as temperature rises), you can use the "Inverse Analog (Change Sign)" component to achieve this inversion.

By reversing the sign of the analog value, you can adapt the input signal to match the requirements of your project or control system.

Diagram:

File:TInverseAnalog.Preview.png

Categories

• - Analog components category
• - Math components category
• File:TArduinoFilterToolbarCategory.png - Summaries:Summary Category Filter

Properties

• Enabled - Enables or disable the component.

Pins

• In - The Analog Input pin of the component or element
• Out - The Analog Output pin of the component or element