View source for 4 Wire Stepper Motor

[[Image:TArduinoStepperMotor4Wire.png]]

== Summary ==
{{:Summaries:Summary 4 Wire Stepper Motor}}

== Description ==
Use this component to control a 4 wire stepper motor.

Please note that you should never connect a motor physically directly to an Arduino board, unless the board has built in motor drivers. You will need a hardware driver connected between Arduino and the motor.





<b>Resources:</b>

[http://www.instructables.com/id/Arduino-Nano-and-Visuino-Control-Stepper-Motor-Wit/ Instructable: Arduino Nano and Visuino: Control Stepper Motor with Buttons]

[http://www.instructables.com/id/Arduino-Nano-and-Visuino-Control-Stepper-Motor-Wit-1/ Instructable: Arduino Nano and Visuino: Control Stepper Motor with Rotary Encoder]

<b>Diagram:</b>

[[Image:TArduinoStepperMotor4Wire.Preview.png]]

== Categories ==
*[[Image:TArduinoStepperMottorsToolbarCategory.png]] [[Category Motors/Stepper Motors]] - {{:Summaries:Summary Category Motors/Stepper Motors}}
*[[Image:TArduinoDigitalToolbarCategory.png]] [[Category Digital]] - {{:Summaries:Summary Category Digital}}

== Properties ==
*[[TArduinoCommonStepperHalfStep.HalfStep|HalfStep]] - {{:Summaries:Summary TArduinoCommonStepperHalfStep.HalfStep}}
*[[TArduinoCommonStepper.Enabled|Enabled]] - {{:Summaries:Summary TArduinoCommonStepper.Enabled}}
*[[TArduinoCommonStepper.Reversed|Reversed]] - {{:Summaries:Summary TArduinoCommonStepper.Reversed}}
*[[TArduinoCommonStepper.StepsPerSecond|StepsPerSecond]] - {{:Summaries:Summary TArduinoCommonStepper.StepsPerSecond}}

== Pins ==
*[[TArduinoCommonStepper.OutputPins|Out]] - {{:Summaries:Summary TArduinoCommonStepper.OutputPins}}
*[[TArduinoCommonStepper.StepInputPin|Step]] - {{:Summaries:Summary TArduinoCommonStepper.StepInputPin}}

[[Category:Components]]