4 Wire Stepper Motor: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Image:TArduinoStepperMotor4Wire.png == Summary == {{:Summaries:Summary 4 Wire Stepper Motor}} == Description == Use this component to control a 4 wire stepper motor. Please note that you should never connect a motor physically directly to an Arduino board, unless the board has built in motor drivers. You will need a hardware driver connected between Arduino and the motor. <b>Resources:</b> [http://www.instructables.com/id/Arduino-Nano-and-Visuino-Control-Ste...") |
(No difference)
|
Latest revision as of 08:00, 10 June 2022
Summary
Controls a 4 wire stepper motor
Description
Use this component to control a 4 wire stepper motor.
Please note that you should never connect a motor physically directly to an Arduino board, unless the board has built in motor drivers. You will need a hardware driver connected between Arduino and the motor.
Resources:
Instructable: Arduino Nano and Visuino: Control Stepper Motor with Buttons
Instructable: Arduino Nano and Visuino: Control Stepper Motor with Rotary Encoder
Diagram:
Categories
- Category Motors/Stepper Motors - Stepper Motor components category
- Category Digital - Digital(Boolean) components category
Properties
- HalfStep - Specifies if the stepper motor will be controlled with half or full step
- Enabled - Enables or disable the component.
- Reversed - Specifies the direction of the stepper
- StepsPerSecond - Specifies how many steps the motor should move per second