Weight Scale HX711

Summary

Reads data from HX711 Weight Scale

Description

Use this component to read data from HX711 Weight Scale.

Resources:

Instructable: Arduino Nano and Visuino: Measure Weight with HX711 Load Cell Amplifier and ADC

Diagram:

Categories

• Category Measurement/Analog - Analog Measurement components category
• Category Analog - Analog components category

Properties

• Powered - Specifies if the scale chip is powered
• ScaleDivider - Specifies the scale divide factor for the conversion into weight units
• Offset - Specifies the offset for the conversion into weight units
• UseChannelB - Specifies the HX711 channel to be used - A or B
• Gain128 - Specifies the gain for the programmable gain amplifier - 64 or 128
• Average - Specifies the number of measurement to be averaged to reduce noise
• Enabled - Enables or disable the component.

Pins

• SensorClock - The The Sensor's Clock Arduino Board pin
• SensorData - The The Sensor's Data Arduino Board pin
• Zero - The Zero scale Clock Input pin of the component
• Calibrate - The Calibrate scale Clock Input pin of the component
• Clock - The clock input pin of the component or element
• Out - The Analog Output pin of the component or element